保养误区

　　Maintenance Misconceptions

　　误区一:润滑越多越好

　　Misconception 1: The more lubrication, the better

　　有人觉得润滑脂加得越多越，实则过量会导致散热差、积尘加速，反而增加摩擦。正确做法:每次少量涂抹，确保钢珠与螺旋槽均匀覆盖即可，每月检查一次。

　　Some people think that adding more grease is safer, but in fact, excessive amount can lead to poor heat dissipation, accelerated dust accumulation, and increased friction. Correct practice: Apply a small amount each time to ensure that the steel ball and spiral groove are evenly covered. Check once a month.

　　误区二:忽视环境清洁

　　Misconception 2: Neglecting environmental cleanliness

　　粉尘、冷却液是滚珠丝杠的“隐形杀手”，很多人只擦表面却忽略螺旋槽内的残留。建议:每周用高压气枪清理槽内杂质，潮湿环境加防护套，避免锈蚀。

　　Dust and coolant are the "invisible killers" of ball screws, and many people only wipe the surface but ignore the residue inside the spiral groove. Suggestion: Use a high-pressure air gun to clean impurities in the tank every week, and add a protective cover in a humid environment to avoid corrosion.

　　误区三:故障就拆修

　　Misconception 3: Disassemble and repair faults

　　轻微异响或卡顿就急于拆卸，可能导致安装精度丢失。正确步骤:先排查是否缺润滑或有异物，非结构性问题尽量不拆，必要时找人员校准。

　　Hasty disassembly due to slight abnormal noise or jamming may result in loss of installation accuracy. Correct steps: First, check if there is a lack of lubrication or foreign objects. Non structural problems should be avoided as much as possible, and if necessary, seek professional calibration.

　　本文由 pg电子游戏太阳神传说 友情奉献.更多有关的知识请点击  //www.crazwind.com/   真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from the guide screw For more related knowledge, please click //www.crazwind.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.